DIY Custom Dice

These are some dice that I made using a method that i discovered on the internet. Here,s how they turned out:

Now how to make them:

1) Print off your design onto ink jet photo paper using a laser printer.
2) gently sand your dice with extra fine sand paper.
3) Cut out your designs and place them on the face you want them to be.
4) press an Iron onto the transfer for 10 seconds, lift for 4 seconds and press again for 5 seconds. (times may differ, experiment to see what works better for you.
5) put your dice in a jug of water for about 5-10 mins (until you can rub off the paper).
6) Remove the Dice from the water and rub the paper off, Rub fairly hard cos if you image comes off from rubbing it wont survive being used.
7) Repeat for all sides on all your dice.