Here are some photos of a few of the Dreafleet ships that I painted for a friend a while back,
Sorry for lack of details as I'm building this blog up from past things I've done and I can't remember a lot of my processes that I used.
So here they are:
Wednesday, 13 March 2013
Sunday, 24 February 2013
DIY Custom Dice
These are some dice that I made using a method that i discovered on the internet.
Here,s how they turned out:
Now how to make them:
1) Print off your design onto ink jet photo paper using a laser printer. 2) gently sand your dice with extra fine sand paper. 3) Cut out your designs and place them on the face you want them to be. 4) press an Iron onto the transfer for 10 seconds, lift for 4 seconds and press again for 5 seconds. (times may differ, experiment to see what works better for you. 5) put your dice in a jug of water for about 5-10 mins (until you can rub off the paper). 6) Remove the Dice from the water and rub the paper off, Rub fairly hard cos if you image comes off from rubbing it wont survive being used. 7) Repeat for all sides on all your dice.
1) Print off your design onto ink jet photo paper using a laser printer. 2) gently sand your dice with extra fine sand paper. 3) Cut out your designs and place them on the face you want them to be. 4) press an Iron onto the transfer for 10 seconds, lift for 4 seconds and press again for 5 seconds. (times may differ, experiment to see what works better for you. 5) put your dice in a jug of water for about 5-10 mins (until you can rub off the paper). 6) Remove the Dice from the water and rub the paper off, Rub fairly hard cos if you image comes off from rubbing it wont survive being used. 7) Repeat for all sides on all your dice.
Sevrin Loth conversion
High Elf Chariot Trade
Saturday, 23 February 2013
Trollbloods Axer Light Warbeast
First up is my Trollblood Axer. This was the firs Hordes miniature that I painted, I will post more up as I am currently working on the rest of my Trollbloods for a small tournament coming up soon.
I mixed my own colours for the skin as I didn't want to get another range of paints. The mid colour is a mix of Enchanted Blue, Fortress Grey and Dwarf Skin from GW.
The tartan was fun to do but after doing this I decided to re-paint it (still not got round to doing it) as it would be far too difficult to recreate this effect on some of the other models with folded cloth.
I mixed my own colours for the skin as I didn't want to get another range of paints. The mid colour is a mix of Enchanted Blue, Fortress Grey and Dwarf Skin from GW.
The tartan was fun to do but after doing this I decided to re-paint it (still not got round to doing it) as it would be far too difficult to recreate this effect on some of the other models with folded cloth.
Subscribe to:
Posts (Atom)